Wednesday, 17 April 2013

EXTINGUSHING THE FLAME AND STOP WELDING

1)When the welding or cutting operation is finished, close the torch acetylene valve and then turn off the torch oxygen valve.

2)Close the oxygen cylinder valve.

3)Release the pressure in the hose and regulator by opening the oxygen control valve on the torch.

4)Release the pressure in the oxygen regulator diaphragm by turning the regulator to the minimum pressure position.

5)Close the oxygen control valve on the torch.

6)Repeat the same procedure for acetylene.

3 comments:

  1. Great information, Thank you for sharing and keep posting.
    Also check - Diffusion Engineers is the best infrastructure in industry that involves into the wide range of welding consumable, welding electrodes maintenance, manufacturers and suppliers of wear plates and components in India.
    Wear Plates Manufacturers in India
    Welding Consumables Manufacturers
    Flux Cored Wire Manufacturers
    Welding Consumables
    Welding Electrodes Manufacturers in India
    Flux Cored Wire Suppliers


    ReplyDelete
  2. Welding
    MS Metals leaves no stone unturned. Our expert welders are fully equipped with top class welding machines including Gas, TIG and MIG machines to work with mobile devices and all sorts of metal, steel, aluminium welding. Our heavily experienced welders can make any signs of your choice.

    ReplyDelete
  3. Great information and blog. keep sharing good information.
    We are MIG Welders in Ludhiana.

    ReplyDelete